Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. A configurable field is enclosed in brackets, and is highlighted when selected. You may install the USB module in the chassis front panel. Table Of Contents Safety information To print the manual completely, please, download it. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch.

Uploader: Zugrel
Date Added: 16 November 2010
File Size: 26.42 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 47938
Price: Free* [*Free Regsitration Required]

Setting wrong values in the sections below may cause system to malfunction. The bus frequency external frequency multiplied by the bus multiple equals the CPU speed.

Asus P4P800S-X User Manual

The edge with external ports goes to the rear part of the chassis as indicated in the image below. Follow the hard disk drive documentation when setting the device in master or slave mode. Enter audioo from picture: After connecting one end to the motherboard, connect the other end to the floppy drive.

This prevents incorrect orientation when you connect the cables. Some of the navigation keys differ from one screen to another.



The plugs from the power supply are designed to fit these connectors in only one orientation. The lever clicks on the side tab to indicate that it is locked. When the copy process is complete, the utility returns to the DOS prompt. Install an expansion card following the instructions that came with the chassis. B – supports on pair ;4p800s-x modules inserted into either the slots as one pair of Dual-channel memory configuration.


Select an item then press Enter if you wish to configure the item. See page for details. The firmware hub on the motherboard stores the Setup utility. Locked Ratio Actual Value: Select an item then press Enter to display the sub-menu.

ASUS P4P800S-X – motherboard – ATX – Socket 478 – i848P Series

Do not overtighten the screws! If you attempt to exit the Setup program without saving your changes, the program prompts you with a message asking if you want to save your changes before exiting. The illustration below shows the location of the onboard LED. This utility helps you keep your computer at a healthy operating condition. If you set to any of these options audiio encounter problems, revert to the default setting S-ATA.


This Line In light blue jack connects a tape player or other audio sources. If no USB device is detected, the item shows None.

A very high Vcore voltage may severely damage the CPU! Contact a qualified service technician or your retailer. Page of 70 Go.

To set a User Password: For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. For system failure due to overclocking, use the C. The contents of the support CD are subject to change at any time without notice.

P4PX | ASUS Global

See list of Qualified Vendors List on page You may also find this information on the inside front cover of this user guide. Limited allows change to only selected fields, such as P4p800s-d and Time.

The read or write activities of any device connected to the primary or secondary IDE connector cause this LED to light up.